Intellinet 524773 - Page 9

9
INSTA LL ATION
3. Highlight the access
point you want to
use (if it’s shown),
then click “Connect.”
4 . If it’s an unnamed
access point (i.e.,
the SSID of the
wireless AP is
hidden), you’ll be
prompted to input
its name, which
must be entered
exactly — without
error or deviation —
in order to make a
valid connection.
5 . If the access point
is protected by an
encryption method,
you need to input
its security code or
passphrase here.
As with the SSID, it
must match the
encryption setting
exactly. (Typically,
you would obtain it
from the AP’s
administrator.)