Intense m16 - MAINTENANCE SCHEDULE

INTENSE CYCLES // 1 9
maintenance Schedule*
Action Every Ride
500 Miles or
1 Month
2000 Miles or 6
Months
4000 Miles or
1 Year
Tires
Check air pressure, inspect tread and sidewalls for tears and punctures X
Chain
Brush off and lubricate X
Brakes
Squeeze brakes and confirm function X
General
Clean complete bike of mud and debris X
Headset
Check adjustment X
Box Link
Add grease thru zerk fittings X
Frame Pivots
Check torques X
Spokes
Inspect for damage, check tension X
Shock and Fork
Check air pressure, inspect for leaks X
Deraileur Cables
Inspect and lube X
Seatpost
Clean and regrease interface with frame X
Frame Pivots
Remove pivot bolts, check bearings for pitting and wear X
Headset
Disassemble stem, headset and fork. Check bearings for pitting and wear X
Hubs
Pull wheels off, check hub bearings for pitting and wear X
Bottom Bracket
Remove crank arms and check BB bearings for pitting and wear X
Brakes
Replace brake pads X
Chain
Inspect for damage and check for stretching X
General
Complete Tune-Up X
Shock and Fork
Overhaul See MFG Recommendations
* THE ABOVE MAINTENANCE SCHEDULE IS ONLY A GUIDELINE. refer to COMPONENT MANUFACTURER FOR SPECIFIC INSTRUCTION ON MAINTAINING THEIR PARTS.