Interacoustics EyeSeeCam vHIT - The Goggle Frame; The Headband

Service manual
EyeSeeCam vHIT
7
2.2.3 The goggle frame
In case the goggle frame is broken, the frame is exchanged.
The plastic frame is available as a spare part (see Appendix B - Parts
& Accessories). Purchasing new springs,
hot mirrors, or silicone tubes is not necessary, as these parts can be taken from the broken frame and used on
the new one.
This is how to exchange a spring:
Remove the springs from the
goggle frame.
2.2.4 The headband
The procedure to attach a new head band is described below. For starters, to remove the old headband, first
remove the fastening pin.
Thread the strap through the right
-hand side slot
of the frame and then through the band clip.
Insert the strap in the left slot of the frame.
Figure
10
Attach the fastening pin to the strap.
Figure 11
Figure 7
Figure 8
Figure 9