Interacoustics Titan User Manual

Titan Instructions for Use - EN Page 6
Markings
The following markings can be found on the instrument:
Symbol
Explanation
Type B applied parts.
Patient applied parts that are not conductive and can be immediately
released from the patient.
Applied part is Type BF according to the international standard IEC60601-1.
Electrostatic sensitive device.
Caution - Refer to instruction manual.
Follow instructions for use
WEEE (EU-directive)
This symbol indicates that when the end-user wishes to discard this product,
it must be sent to separate collection facilities for recovery and recycling.
Failing to do so may endanger the environment.
0123
The CE-mark indicates that Interacoustics A/S meets the requirements of
Annex II of the Medical Device Directive 93/42/EEC. TÜV Product Service,
Identification No. 0123, has approved the quality system.
Serial number.
Date of manufacture.
Manufacturer.
Reference number.
Do not re-use.
Parts like ear-tips and similar are for single use only.
Keep dry.

Interacoustics Titan Specifications

General

Category	Measuring Instruments
Display	Color touch screen
OAE	Yes
Diagnostic	Yes
Battery Life	Up to 8 hours
Frequency Range	226 Hz, 678 Hz, 800 Hz, 1000 Hz
Probe Tone Level	85 dB SPL
Test Types	Tympanometry, Reflex
Connectivity	USB
Power Supply	Rechargeable Battery