Titan Instructions for Use - EN Page 11
Mounting a Cradle on the wall
In order to mount the cradle to the wall you will need the following tools: a drill and a screwdriver.
You may need to find out which plugs and screws are best to use depending on the material of the wall.
Use the retaining plate of the cradle and a pencil to
draw the exact position of the 3 screw holes on the
wall. Make sure that the height is chosen in a way
that you can still read the Titan display when it is
placed in its cradle.
Drill the holes and insert the plugs provided. Use
three screws to mount the retaining plate to the
wall.
Put the power cable, printer cable and USB cable
behind the retaining plate. Attach these to the
cradle before sliding the cradle onto the retaining
plate.
Now the spare battery and Titan can be placed in
To Next Page
Loading...
