Interacoustics Titan - Software Installation Steps

Titan Instructions for Use - EN Page 28
Software Installation on Windows
®
7, Windows
®
8 and Windows
®
10
Insert the installation DVD and follow the steps below to install the Titan Suite software. If the installation
procedure does not start automatically, click “Start”, then go to “My Computer” and double click the DVD/CD-
RW drive to view the contents of the installation DVD. Double click the “setup.exe” file to initiate the
installation.
1. Wait for the dialog shown below to appear, agree to the license terms and conditions, then click
“Install”.
2. Follow the onscreen Titan Installer instructions until the installation has been completed. Click on
“Close”. The software is now installed and ready to use.
During installation, Windows® may:
a) Ask if you want to allow changes to the computer. Click Yes if this happens
b) Ask to download and install a new Windows Feature (e.g., .NET Framework 3.5). Download and
install new features to ensure that the Titan Suite software works as intended
c) Warn you that Windows cannot verify the publisher of this driver software. Install the driver
software anyway to ensure the Titan works as intended. If not installed, the Titan will not be
detected by the computer when connected via USB