16 Ga. Medium Crown Stapler
Drives 7/16" Crown Staples (1" to 2" / 25 to 51mm)
Model No. SN5016
Item No. 64405
3
Interchange Brands Operator’s Manual
Important Information
WARNING: The warnings, cautions and instructions discussed
in this instruction manual can not cover all possible conditions and
situations that may occur. It must be understood by the operator
that common sense and caution are factors which can not be built
into this product, but must be supplied by the operator.
When using the tool, basic safety precautions should always
be followed to reduce the risk of personal injury and damage to
equipment.
Read and understand tool labels and operating instructions, safety precautions and
warnings in this manual before operating or maintaining this stapler.
Failure to follow warnings could result in DEATH or SERIOUS INJURY.
Most accidents that result from the operation and maintenance of staplers are caused
by the failure to observe basic safety rules or precautions. An accident can often
be avoided by recognizing a potentially hazardous situation before it occurs and by
observing appropriate safety procedures.
Basic safety precautions are outlined in the “SAFETY” section of this Manual and in
the sections which contain the operation and maintenance instructions.
Hazards that must be avoided to prevent bodily injury or tool damage are identified as
DANGERS or WARNINGS on the stapler and in this Manual.
Never allow the stapler to be operated by children or individuals who have not
reviewed this manual.
OPERATE THE STAPLER ACCORDING TO THIS MANUAL.
WARNING!
■ Always follow the tool manufacturer’s safety and
maintenance instructions.
■ Always wear safety glasses with side shields when operating
or servicing tools.
■ Always disconnect the air supply from the tool and empty the
magazine when servicing tools.
!
!
SAVE THIS MANUAL
FOR FUTURE REFERENCE!
To Next Page
Loading...
