BSC4 Operating Manual
Interface Inc. ● 7401 East Butherus Drive, Scottsdale, Arizona 85260 USA ● Phone 480.948.5555 ● Fax 480.948.1924
www.interfaceforce.com ● Email: contact@interfaceforce.com ● 800.947.5598
Document Number 15-183 Rev B Page 28 of 74
2.3. Click Connect
FIGURE 18 - ADD CHANNEL MENU
3. BSC8 has a slightly different add channel box. Select Dev1 instead of Com port. Please
remember to open the needed amount of input channels.
FIGURE 19 - EXAMPLE BSC8 DEVICE
4. Each channel must now be scaled using the “SCALING” dialog box. Each channel must be scaled
independently. If the BSC8 was purchased with Interface load cells and a System Setup and
To Next Page
Loading...