Interflex IF-4070 - User Manual

Installation and Connection Instructions
for
IF-4070 Terminal Controller
95-10263_Terminal Controller IF-4070 Version: 1/16/2013

Interflex IF-4070 Specifications

General

Series	IF-4000
Input Voltage	12 VDC
Output Current	1A
Communication Interface	TCP/IP, RS-485
Number of I/O	8

Summary

Function

Interfaces

Controller Housing

Installation and Mounting

Mounting

Provides options for mounting the terminal controller into 19" modules or on a wall.

Electrical Wiring

Connections

Connection of the Power Supply

Details how to connect the 230 VAC or PoE power supply.

Connection of Low-voltage Supply

Explains connecting low-voltage power sources and battery options.

Specific Connections

Connection to PoE

Details how to connect the terminal controller using Power over Ethernet.

Connection to Ethernet Networks

Connection to Serial PC Ports

Initial Operation

Procedure

Outlines the recommended steps for initial setup and operation.

Power On and Cold Boot

Parameterization

Login and TELNET Connection

Guides on logging in and establishing a TELNET connection for configuration.

Network and Interface Configuration

Network Connections

How to configure network parameters using the 'netpar' command.

Interface and Booking Memory Settings

Serial Host and SSH Setup