Programming map
354 Advisor Advanced ATSx500A(-IP) Installation and Programming Manual
2.2.2.n.2 Expander address
2.2.2.n.4.1 Expander name
2.2.2.n.4.3 Isolate expander
2.2.2.n.6 Delete expander
Wireless specific options:
2.2.2.n.4.4.1 Short superv.
2.2.2.n.4.4.2 Long superv.
2.2.2.n.4.4.3 Smoke superv.
2.2.2.n.4.5 R. Sensitivity
2.2.2.n.4.6 Expander mode
2.2.2.n.4.8 Jamm detection
2.2.2.n.4.11 Default expander
2.2.2.n.4.9.1 Pic settings
2.2.2.n.4.9.1.1 Burglar settings
2.2.2.n.4.9.1.1.1 Pic amount
2.2.2.n.4.9.1.1.2 Frame rate
2.2.2.n.4.9.1.1.3 Pic resolution
2.2.2.n.4.9.1.2 Fire settings
2.2.2.n.4.9.1.3 Panic settings
2.2.2.n.4.9.1.4 Medical set.
2.2.2.n.4.9.1.5 Tamper set.
2.2.2.n.4.9.1.6 Fault settings
2.2.2.n.4.9.1.7 Custom type 1
2.2.2.n.4.9.1.8 Custom type 2
2.2.2.n.4.9.2 Show pic mem
2.2.2.n.4.9.3 Pic auto deletion
2.2.2.n.4.9.4 Total pic cnt