Interlogix ATS3500A-IP-MM

Programming map
Advisor Advanced ATSx500A(-IP) Installation and Programming Manual 357
4 Zones and areas
4.1 Zone menu
4.1.0 Add zone
4.1.n Select zone
Common options
4.1.n.1 Zone name
4.1.n.2 Zone type
4.1.n.3 Isolated
4.1.n.4 Zone location
4.1.n.5 Zone areas
4.1.n.6 Zone options
4.1.n.6.1 Inhibit
4.1.n.6.20 Technical unset
4.1.n.6.2 Isolate
4.1.n.6.21 Technical part set
4.1.n.6.3 Excl. in PS1
4.1.n.6.22 Keypad LCD
4.1.n.6.4 Excl. in PS2
4.1.n.6.23 Log
4.1.n.6.5 Double knock
4.1.n.6.24 CS report
4.1.n.6.6 Swinger shunt
4.1.n.6.25 Delay timer
4.1.n.6.7 Anti mask
4.1.n.6.26 ACK on keypad
4.1.n.6.8 Zone pairing
4.1.n.6.27 ACK by user
4.1.n.6.9 Chime
4.1.n.6.28 Sensor type
4.1.n.6.10 Soak test
4.1.n.6.29 Virtual zone
4.1.n.6.11 Engineer walk test
4.1.n.6.30 Held open
4.1.n.6.12 User walk test
4.1.n.6.31 EE set check
4.1.n.6.13 Shock sensor
4.1.n.6.32 Alarm in PS1
4.1.n.6.14 Extend EE
4.1.n.6.33 Alarm in PS2
4.1.n.6.15 Final door
4.1.n.6.34 Report as
4.1.n.6.16 Key latch
4.1.n.6.35 Auto test
4.1.n.6.17 Key set
4.1.n.6.36 Shunt
4.1.n.6.18 Key unset
4.1.n.6.37 View isolated
4.1.n.6.19 Technical full set
4.1.n.6.38 Stop report
Shock sensor options
4.1.n.7 Grs&Pls options
4.1.n.7.1 Pulse count
4.1.n.7.2 Gross level
4.1.n.8 Copy
4.1.n.8.1 Copy par. from
Wireless sensor options:
4.1.n.8.2 Block assign
4.1.n.7 RF details
4.1.n.7.1 Sensor ID
4.1.n.9 Move zone
4.1.n.7.2 Sensor type
4.1.n.10 Delete zone
4.1.n.7.3 Sensor mode
4.1.n.7.4 Supervision
4.1.n.7.5 Sensor opt
4.1.n.7.6 Remove RF dev

