PIR Camera Reference Manual 9
2.2.2.n.4.09.1.6 Fault settings
See “2.2.2.n.4.09.1.1 Burglar settings” on page 8.
2.2.2.n.4.09.1.7 Custom type 1
2.2.2.n.4.09.1.8 Custom type 2
Custom types are used with condition filters for camera activation.
See “2.2.2.n.4.09.1.1 Burglar settings” on page 8.
2.2.2.n.4.09.2 Show pic mem
Pictures: 12
Left sp for: 123
Free SP: 3,0MB
Total SP: 4,0MB
The informational screen shows a pictures number currently stored in the
wireless PIR camera expander as well as available memory.
2.2.2.n.4.09.3 Pic auto deletion
The value defines whether the pictures stored in the wireless PIR camera
expander will be deleted automatically after a chosen period of time (in days).
The allowed range is 1 to 120 days. 0 or Off mean that pictures are never deleted
automatically. Users must control the available memory and remove pictures
manually.
2.2.2.n.4.09.4 Delete pics
Choose OK and press Enter to remove all stored pictures from the wireless PIR
camera expander.
4.1.0 Add zone
To add a wireless PIR camera, follow these steps.
1. Select zone location.
1>Expander 1
2 Expander 2
2. Choose Sequential mode and press Enter.
To Next Page
Loading...
