• To prevent formatting failure, we recommend NAS drives with a capacity between 9
GB and 2 TB.
To set up a NAS system:
1. From the menu toolbar, click Configuration > Storage > Storage Management >
NAS.
2. Click inside the NAS table to type the IP address and the file path of the network
disk in the appropriate HDD No. row.
3. Select the hard drive mounting protocol (NFS or SMB/CIFS). A user name and
password are required if SMB/CIFS is selected.
4. Click Save to save changes.
46 TruVision 81 Series IP Camera Configuration Manual
To Next Page
Loading...
