To archive a recorded video segment during playback:
1. While playing back a recorded file, click to start clipping. Click it again to stop
clipping. A video segment is created.
2. Repeat step 1 to create additional segments. The video segments are saved on the
local computer.
Snapshot
Note: Follow the instructions under “Snapshot parameters” on page 43 to configure
snapshot capture parameters before using the Snapshot menu.
Click Snapshot to launch the picture searching interface. Use this menu to search for,
view, and download the pictures stored in the camera’s SD card or in network storage.
To search the snapshots:
1. Make a selection from the File Type drop-down list. Schedule, Motion, Alarm,
Cross Line, and Intrusion Detection are selectable (PIR Alarm is selectable for
Desktop cameras only).
2. Click on the calendar icon in the Start Time and End Time boxes to select the start
time and end time.
3. Click Search to search the matched pictures.
4. Select the check box next to one or more snapshots and then click Download to
download the selected images.
TruVision 81 Series IP Camera Configuration Manual 59
To Next Page
Loading...
