Interlogix RS-3230 - Camera Configuration; Configuration Panel Overview

Camera configuration
This chapter explains how to configure the cameras using a web browser.
After the camera hardware has been installed, configure the camera’s settings using
the web browser. Administrator rights are required to configure the cameras over the
internet.
The camera web browser permits configuration of the camera remotely using a PC.
Web browser options may vary depending on camera model.
Configuration panel overview
Use the Configuration panel to configure the server, network, camera settings, alarms,
users, transactions, and other parameters such as upgrading the firmware.
This section contains images and descriptions of each of the configuration panel
windows.
Local
Use the Local window to manage the protocol type, live view performance, and local
storage paths. In the Configuration panel, click Local to display the local configuration
window.
Parameters Description
Live View Parameters
1.
Protocol
Specifies the network protocol used.
Options include: TCP, UDP, MULTICAST, and HTTP.
2.
Live View Performance
Specifies the transmission speed.
Options include: Shortest Delay or Auto.
3.
Rules
Specifies Live View display rules. Select Enable to tag a
moving object with green rectangles.
TruVision 81 Series IP Camera Configuration Manual 7