• The temporary Wi-Fi connection becomes available and setup can continue after
disconnecting an Ethernet cable from the camera.
• Cameras are identifiable on the Wi-Fi network by their unique SSID address, which
is comprised of the camera's model number plus serial number.
• Cameras have WPA2-PSK Wi-Fi security settings enabled by default. The camera's
serial number is the unique default wireless password.
• 192.168.2.70 is used for the default camera IP address and 192.168.2.71 is
assigned to the client. Only one client and IP address are assigned, so only one
user at a time can access the camera in temporary Wi-Fi mode.
TruVision 81 Series IP Camera Configuration Manual 3
To Next Page
Loading...
