Chapter 18: Using the web browser
TruVision DVR 12HD User Manual 129
Go to Browser Configuration to set up the browser parameters. See “Access the web
browser” on page 123 for further information.
Note: The configuration settings defined remotely are different from those that can be
defined locally.
Figure 34: Remote browser configuration window (System Information window shown)
Table 19: Description of remote configuration menus
Menu Function Description
Camera Setup Camera Recording
Settings
Define the general camera settings such as camera name,
stream record mode, resolution, frame rate, audio recording,
and pre and post event times. See “Camera recording
settings” on page 63 for more information.
Snapshots Define the image quality of snapshots. See “Snapshots” on
page 65 for further information.
Camera OSD Define which information is displayed on-screen. Only
applied for analog cameras. See “Camera OSD” on page 66
for further information.
Motion Detection Define motion detection parameters. See “Motion detection”
on page 67 for more information.
Privacy Mask Define the on-screen privacy mask areas. See “Privacy
mask” on page 69 for more information.
Camera Tamper Define the video tampering detection settings. See “Camera
tamper” on page 70 for more information.
Text Overlay This function is only available via the browser. See “Text
overlay” on page 131 for further information.
Restricted Access
Camera
Define the cameras whose images cannot be displayed by
those not logged in. See “Restricted access camera” on
page 70 for more information.
PTZ Setup Define the PTZ parameters such as preset and shadow
To Next Page
Loading...
