V-stream Encoding Define the v-stream parameters. See “V-stream encoding”
on page 75 for more information.
Network Settings Network Settings Define the general network settings. See “Network settings”
on page 77 for more information.
PPPoE Define the PPPoE settings. See “PPPoE settings” on page
79 for more information.
DDNS Define the DDNS settings. See “DDNS settings” on page 80
for more information.
NTC Define the NTC server settings. See ““NTP server settings”
on page 81 for more information.
Email Define the settings to send an e-mail. See “E-mail settings”
on page 82 for more information.
FTP Define the FTP settings. See “Configure an FTP server to
store snapshots” on page 83 for more information.
SNMP Define the SNMP settings. See “SNMP settings” on page 83
for more information.
UPnP Enable this function so that the recorder can automatically
configure its own port forwarding. See “UPnP settings” on
page 84 for more information.
More Settings Define a multicast IP as well as the server, HTTP, and RTSP
ports. See page 77.
Net Statistics Check the bandwidth being used by remote live view and
playback. See “Network statistics” on page 86 for more
information.
Recording Recording Schedule Define the recording schedules. See “Recording schedule”
on page 87 for more information.
Manual Recording Define which cameras can manually record. See “Manual
recording” on page 90 for more information.
Alarm & Event
Setup
Alarm Input Define the alarm input parameters for when an external
alarm is triggered. See “Set up alarm inputs” on page 91 for
more information.
Alarm Output Define the response when an external alarm is triggered.
See “Manual trigger” on page 93 for more information.
Manual Trigger Define the manually trigger outputs of the recorder. See
“Manual trigger” on page 93 for further information.
Buzzer Settings Define the warning buzzer time. See “Buzzer” on page 93 for
more information.
Notifications Define the notification parameters when irregular events
occur, such as a HDD is full. See “Alarm notification types”
on page 94 for more information.
Video Loss Define the video loss detection settings. See “Detect video
loss” on page 95 for more information.
Alarm Host Setup Define the remote alarm host. See “Remote alarm host
setup” on page 96 for more information.
To Next Page
Loading...
