Need help?Do you have a question about the Interlogix TruVision DVR 15HD and is the answer not in the manual?
General| Brand | Interlogix |
|---|---|
| Model | TruVision DVR 15HD |
| Category | DVR |
| Language | English |
Overview of the DVR series and default access credentials.
Description of back panel connections and monitor setup.
Steps for powering on, off, and rebooting the recorder.
Guide to the express installation wizard for initial configuration.
Overview of methods to control the recorder (panel, mouse, remote).
Description of front panel controls, buttons, and LEDs.
How to use the USB mouse for recorder operation.
How to use the IR remote control for recorder functions.
Troubleshooting steps for the IR remote control.
Explanation of the recorder's menu structure and navigation.
Explanation of live view mode and on-screen status icons.
How to access and use the mouse menu for live view features.
How to perform instant replay of recorded video.
Selectively playback recordings with VCA/motion events.
Configuring recording settings for each camera.
Adjusting image settings like brightness, contrast, and hue.
Setting up motion detection, grids, sensitivity, and actions.
Defining hidden areas on screen to mask sensitive views.
Setting up the recorder to alert on camera tampering.
Configuring Video Content Analysis (VCA) events.
Configuring settings for analog PTZ dome cameras.
Configuring and managing PTZ presets and tours.
General configuration of network settings for the recorder.
Configuring email settings for alarm notifications.
Specifying when the recorder records video and which settings to use.
How to manually record video during live view.
Configuring the recorder to respond to external alarm devices.
Connecting the recorder to an alarm system and configuring outputs.
Manually triggering alarm outputs of the recorder.
Setting up the recorder to detect video loss.
Configuring the recorder to send signals to a remote alarm host.
Integrating intrusion panels for alarm reporting.
Steps to set up an alarm panel connection in the recorder.
Setting the date, time, and daylight saving time.
Configuring general recorder options like language and device name.
Methods for updating the recorder's system firmware.
Checking HDD status and initializing the HDD.
Configuring HDD overwrite and adding network HDDs.
Controlling storage mode and organizing HDDs into groups.
How a system administrator can create new user accounts.
Customizing access privileges for Operator and Guest users.
Procedures for deleting and modifying user accounts.
How to change the administrator's password.
How to view device information like model, serial number, firmware.
Viewing status and details for cameras, recordings, and alarm inputs/outputs.
Viewing HDD status, capacity, free space, and group.
Functions available under Camera Setup in the web browser.
Browser functions for snapshots, OSD, motion detection, privacy mask, tamper.
Browser functions for VCA, PTZ, and V-stream settings.
Functions available under Network Settings in the web browser.
Browser functions for network, PPPoE, DDNS, NTP, and email settings.
Functions available under Recording in the web browser.
Browser functions for recording schedule and manual recording.
Functions available under Alarm & Event Setup in the web browser.
Browser functions for alarm input, output, trigger, buzzer, notifications.
Browser functions for video loss, alarm host, and intrusion setup.
Functions available under Device Management in the web browser.
Browser functions for device management settings.
Functions available under Storage Management in the web browser.
Functions available under User Management in the web browser.
Functions available under System Information in the web browser.
Browser functions for reviewing system information statuses.
To Next Page
