Need help?Do you have a question about the Interlogix TruVision TVR-1108-1T and is the answer not in the manual?
General| Brand | Interlogix |
|---|---|
| Model | TruVision TVR-1108-1T |
| Category | DVR |
| Language | English |
Discusses factors to consider for optimal DVR installation, including ventilation, temperature, and moisture.
Step-by-step instructions on how to power on, power off, and reboot the DVR unit.
Guides users through the initial express installation wizard for configuring basic DVR settings.
Details how to configure essential network settings like IP address, subnet mask, and gateway.
Covers the process of managing Hard Disk Drives, including initialization and quota settings.
Explains how to configure the DVR's recording settings for all connected cameras.
Outlines the initial steps for configuring general recording settings for analog cameras before starting to record.
Describes how to specify recording schedules for the DVR, including daily and event-based recordings.
Details how to set up motion detection sensitivity, areas, and schedules for each camera.
Outlines methods to prevent recorded files from being overwritten or deleted, including locking files.
Explains the procedure to lock or unlock individual recorded files to protect them.
Describes how to set an HDD to read-only mode to prevent new recordings from being written to it.
Details how motion detection works and its benefits for finding events in recordings without manual searching.
Provides a step-by-step guide to configure motion detection parameters like sensitivity, target size, and detection areas.
Covers the setup of fundamental network parameters like NIC type, IP address, subnet mask, and gateway.
Explains the necessity of initializing the built-in HDD before it can be used for recording.
Lists the various methods available for controlling the DVR, including front panel, mouse, and remote control.
Guides on customizing live view settings such as monitors, multiview layout, and dwell time options.
Provides instructions on configuring PTZ dome camera settings, including baud rate, protocol, and address.
Details how to save and recall predefined locations (presets) for PTZ dome cameras.
Describes how to quickly replay recorded video from the last five minutes using the quick access toolbar.
Details how to search recorded videos by camera, recording type, time period, events, and snapshots.
Details how to search playback recordings for motion detection incidents within specific areas or the entire window.
Covers the two methods for archiving recorded files: Quick Archive and Advanced Search window export.
Details the methods for updating the DVR's system firmware using USB devices or FTP servers.
Details how to configure On-Screen Display settings for analog cameras, including name, date, and time display.
Guides on defining areas on the screen to be hidden from view for privacy masking purposes.
Provides steps for administrators to add new user accounts with specific access levels and permissions.
Details how administrators can customize access privileges for Operator and Guest users across local, remote, and camera configurations.
Details how to change the administrator's password and MAC address within the User Management menu.
Describes how to access the DVR's interface using a web browser, including IP address and login credentials.
Explains how to use the web browser for both local and remote configuration of DVR settings.
Guides on using the web browser interface to search and play back recorded video footage.
To Next Page
