Interlogix TruVision TVR-1108-1T User Manual

TruVision DVR 11 and DVR 11c User Manual 99
Chapter 13
DVR management
This chapter describes:
 Configuring the RS-232 port
 Updating system firmware
 Restoring default settings
 Viewing system information
 Viewing system logs
Configuring the RS-232 port
Use the System Settings menu to configure the RS-232 parameters such as
baud rate, data bit, stop bit, parity, flow control, and usage.
Figure 31: RS-232 setup window
There are three ways the RS-232 port can be used:
 ProBridge: POS and ATM text insertion supported via the ProBridge
accessory connected to the RS-232 port. See “Capturing text insertions” on
page 120 for more information.
 ATS/Challenger: NTP time sync supported to foreign device over the RS-232
port.
 Technical support: Console mode.

Interlogix TruVision TVR-1108-1T Specifications

General

Brand	Interlogix
Model	TruVision TVR-1108-1T
Category	DVR
Language	English