TruVision DVR 11 and DVR 11c User Manual 35
Chapter 6
Network settings
You must configure your DVR’s network settings before using it over the network.
The DVR must have access to the internet when configuring the network
settings.
Note: As every network configuration may differ, please contact your Network
Administrator or ISP to see if your DVR requires specific IP addresses or port
numbers.
Configuring general network settings
To configure general network settings:
1. Click the Network settings icon in the menu toolbar to display its window.
2. Click General and enter the required settings:
Network interface card (NIC) is a device used to connect the
DVR to a network. Select the NIC type used from the drop-
To Next Page
Loading...
Need help?
General
