8BChapter 9: Live view
TruVision DVR 11 and DVR 11c User Manual 65
3. Left-click the mouse and drag the red square to the area of interest, or press
the arrow button on the front panel to position the red square. The selected
area is magnified.
4. To exit digital zoom, right-click the mouse.
Configuring live view
The setup of live view can be modified from the main menu to suit different
needs, such as the different monitors, multiview layout, and dwell time options.
You can also enable audio output.
In the Layout menu use the Video output interface, Live view mode, Dwell time,
and Enable audio output settings to configure the main monitor. Use Event
output and Full screen monitoring dwell time settings to configure the event
monitor.
Figure 18: Layout window (General tab)
Table 12: Description of the layout window
Select which monitor will be the main monitor: HDMI/VGA, or main
CVBS.
Default is HDMI/VGA, if connected.
mode Select which multiview layout will be default in live view mode. The
factory default multiview format displays all channels (2x2 for the
TVR 11c. 3x3 layout for the 4-channel TVR 11 and 4x4 layout for the
8/16-channel TVR 11).
well time Set the length of time for which a camera image is displayed on the
selected monitor before moving to the next camera during
sequencing. Default is off (“No switch”).
To Next Page
Loading...
