Need help?Do you have a question about the Interlogix TruVision DVR 12 and is the answer not in the manual?
General| Video Input | BNC |
|---|---|
| Hard Drive Support | SATA |
| Compression Format | H.264 |
| Power Supply | 12 VDC |
| Video Output | HDMI, VGA |
| Recording Resolution | 1080p |
| Maximum Internal Storage | 6TB |
| Alarm Input/Output | Yes |
| Network Interface | RJ45 |
| USB Ports | 2 |
| Operating Temperature | 55°C |
| Model | TruVision DVR 12 (TVR12) |
Discusses factors to consider when choosing an installation location for the DVR.
Describes the connectors and ports on the DVR's back panel.
Explains the procedures for powering the DVR on, off, and rebooting it.
Guides users through the initial setup process using the DVR's wizard.
Details how to configure general recording settings for analog cameras.
Explains how to set specific times for DVR recording based on events or schedules.
Lists and describes the various ways the DVR can notify users of alarms.
Guides users on configuring motion detection parameters and areas.
Explains how to set up basic network parameters like IP address and DNS.
Explains how to set up Dynamic Domain Name System for remote access.
Details the process of initializing the DVR's hard disk drive before use.
Describes how to change HDD properties to read-only or read/write.
Outlines the various methods available to control the DVR's functions.
Details how to use the USB mouse for DVR navigation and settings.
Describes the DVR's normal operating mode for viewing live camera feeds.
Explains how to access and use the live view mouse menu for quick commands.
Details how to configure specific settings for PTZ dome cameras.
Explains how to activate pre-programmed camera movements and sequences.
Introduces the interface for managing and viewing recorded video.
Provides methods to search video archives by various criteria like time and event.
Details the methods for saving recorded video and snapshots to external devices.
Guides on selecting files and exporting them to a backup device.
Details the settings for configuring the RS-232 serial port for various uses.
Guides on updating the DVR's firmware using different methods.
Details how to configure on-screen display information for cameras.
Explains how to mask specific areas of a camera's view for privacy.
Guides on creating new user accounts with specific access levels.
Details how to assign specific permissions to user accounts.
Guides on how to open and log into the DVR's web interface.
Explains how to configure DVR settings using both local and remote web browser access.
Lists the technical specifications for video and audio inputs.
Lists the technical specifications for video and audio outputs.
Provides links for third-party help with router configuration.
Lists the supported firmware versions for the DVR and keypad.
Explains how to connect the KTD-405 keypad to the DVR using RS-485.
Lists maximum pre-recording times based on constant bit rates.
Details PTZ command support across various camera protocols.
Lists the default settings for monitor display and general configurations.
Lists default settings for OSD, image, motion, privacy mask, and tamper-proof.
Lists product codes for the Americas region.
Lists product codes for the EMEA region.
To Next Page
