TruVision DVR 12 User Manual 99
Chapter 13
DVR management
This chapter describes:
Configuring the RS-232 port
Updating system firmware
Restoring default settings
Viewing system information
Viewing system logs
Configuring the RS-232 port
Use the System Settings menu to configure the RS-232 parameters such as
baud rate, data bit, stop bit, parity, flow control, and usage.
Figure 31: RS-232 setup window
There are three ways the RS-232 port can be used:
ProBridge: POS and ATM text insertion supported via the ProBridge
accessory connected to the RS-232 port. See “Capturing text insertions” on
page 120 for more information.
ATS/Challenger: NTP time sync supported to foreign device over the RS-232
port.
To Next Page
Loading...
