Chapter 4: Recording
TruVision DVR 12 User Manual 19
6. Click the Capture tab and configure the settings for captured video, such as
snapshots. Click Apply to save the settings.
7. Click Back to return to live view.
Configuring overwrite
You can select how the NVR responds when the HDDs become full and there is
no longer sufficient space to save new data.
To configure for overwrite when the HDDs are full:
1. From the menu toolbar, click Video Schedule > More Settings.
2. Under Overwrite, select Yes.
Calculating the maximum permitted frame rates and bit
rates
You can easily calculate the correct frame rates, bit rates, and HDD free space
required for your system.
Note: If you should later change any recording parameters, the calculated values
will no longer apply.
To configure recording settings:
1. From the menu toolbar, click Video Schedule > Encoding > Encode
Parameters Recommendation.
2. Enter the number of days to be recorded and the resolution. Also specify
whether the recoding period will include weekdays and weekends.
3. Click Calculate. The recommended maximum values for the frame rate, bit
rate, and HDD free space are then displayed.
Use this information when setting the recoding parameters.
Note: This option is not available via the browser.
To Next Page
Loading...
