Chapter 6: Network settings
TruVision DVR 12 User Manual 41
Checking network status
You can easily check network traffic in order to obtain information about the DVR
such as its linking status, MTU, sending/receiving rate, MAC address, and NIC
type.
You can also check the network connection status by testing its delay and packet
loss.
To check network traffic:
1. From the menu toolbar, click System Settings > Net Detect. The Traffic
window appears. The information displayed is refreshed once a second.
To check network delay and packet loss:
1. From the menu toolbar, click Network Settings > Net Detect.
2. Select the Network Detection Status tab.
3. Under the section “Network Delay, Packet Loss Test”, enter the destination
address and click Test.
The test result appears in a pop-up window.
4. If you need to check the current network parameters, click the Network
button to get an overview.
To Next Page
Loading...
