Chapter 9: Live view
62 TruVision DVR 12 User Manual
Single and multiview display formats
The DVR has single-view display format as well as four multiview formats.
Single view display format
Press the numeric button on the front panel to switch to the corresponding
camera display. For example, press button 10 to view camera 10.
Right-click the mouse and select Single Camera from the menu. Select the
camera required from the list.
Multiview display format
A video tile is any cell in a multiview display. A camera image can only be shown
in one video tile at a time. The number of multiview display formats available
depends on the DVR model. See Figure 15 below.
To change the multiview display that appears by default, go to the Display menu.
See “Changing the camera sequence” on page 67 for more information.
Figure 15: TVR 12 multiview display formats
4-channel DVR:
8/16-channel DVR:
To select a multiview display format:
1. Press the Display button on the front panel to cycle through different display
formats.
You can also right-click the mouse and select Multi Camera from the menu.
Select the desired multiview display layout.
To Next Page
Loading...
