Interlogix TruVision DVR 12 - Chapter 6 Network Settings; Configuring General Network Settings

TruVision DVR 12 User Manual 33
Chapter 6
Network settings
You must configure your DVR’s network settings before using it over the network.
The DVR must have access to the internet when configuring the network
settings.
Note: As every network configuration may differ, please contact your Network
Administrator or ISP to see if your DVR requires specific IP addresses or port
numbers.
Configuring general network settings
To configure general network settings:
1. Click the Network settings icon in the menu toolbar to display its window.
2. Click General and enter the required settings:
Option
Description
NIC type
Network interface card (NIC) is a device used to connect the
DVR to a network. Select the NIC type used from the drop-
down
list.
Default value is 10/100M self-adaptive.