Interlogix TruVision DVR 12 - Calling up presets, tours and shadow tours

Chapter 9: Live view
68 TruVision DVR 12 User Manual
Configuring time and date
You can set up the date and time that will appear on-screen as well as on time
stamped recordings. The start and end time of daylight saving time (DST) in the
year can also be set. DST is deactivated by default. See Figure 20 below for the
Time settings screen.
Figure 20: Time and date settings window
Table 12: Description of the Time and Date settings window
Option Description
1.
Time
Zone Select the time zone of the DVR from the drop-down list.
2.
Date
Format Select the date format from the drop-down list. Default format is
DD-MM-YYYY.
3.
Time
Format Select the time format from the drop-down list. Default format is
24-hour format.
4.
Display
Week Display the day of the week in the monitor time bar.
Check the box to enable/disable. Default format is Disable.
5.
System
Date Define the system date.
Default date is the current date.
6.
System
Time Define the system time.
Default time is the current time.
7.
Auto DST A
djustment Define DST is automatically. It depends on the time zone
selected.
Default format is Disable