. PTZ panel Hide/display the PTZ panel.
Using the web browser to configure the
device
Click Config on the menu bar to display the configuration window. There are two
ways to configure the DVR: Local and Remote.
Local configuration
Local configuration lets you define communication and network parameters such
as protocol type, maximum file size, stream type and network transmission
settings. You can also specify the directory locations for saving recorded and
playback video, captured images, and downloaded files.
Remote configuration
Remote configuration lets you remotely configure the following DVR settings:
• DVR information including device name, number, and overwrite option as well
as time and holiday settings.
• Camera settings including motion detection, privacy masking, video loss,
video tampering, video image display settings, and text overlay
• Recording settings including recording schedule and recording quality
• Network settings including, email, DDNS, and NTP setup
• Serial port settings including RS-485 and RS-232 parameters
• Alarm settings including alert notifications, audio alerts, pre-alarm, and post-
alarm seconds, and notification parameters
• System settings including, user management, date and time, audio, RS-485,
RS-232, language, alarm notification, and hard drive setup
See Figure 33 below. Please refer to the specific chapters on this manual for
detailed information on configuring the different functions.
To Next Page
Loading...
Need help?
General
