8BChapter 9: Live view
62 TruVision DVR 11 and DVR 11c User Manual
Multiview display format
A video tile is any cell in a multiview display. A camera image can only be shown
in one video tile at a time. The number of multiview display formats available
depends on the DVR model. There is only one multiview format available for the
TVR 11c (2 x 2). For the TVR11 multiview formats available, see Figure 15
below.
To change the multiview display that appears by default, go to the Display menu.
See “Changing the camera sequence” on page 66 for more information.
Figure 15: TVR 11 multiview display formats
4-channel DVR:
8/16-channel DVR:
To select a multiview display format:
1. Press the Display button on the front panel to cycle through different display
formats.
You can also right-click the mouse and select Multi Camera from the menu.
Select the desired multiview display layout.
Sequencing cameras
The sequencing feature allows a camera to be displayed briefly on screen,
before advancing to the next camera in the sequence list. Sequencing can only
be done in single-view display mode.
The default sequence displays each camera in numerical order. However, each
camera on the main and auxiliary monitors can have a pre-programmed dwell
time and sequence order. See “Changing the camera sequence” on page 66 for
more information.
Note: Dwell time must not be set to zero for sequencing to function.
To Next Page
Loading...
Need help?
General
