Interlogix TruVision DVR 15HD - HDD Overwrite and Add HDD Settings; Storage Mode and HDD Grouping

Chapter 14: Device management
116 TruVision DVR 15HD User Manual
To set up a holiday recording schedule:
1. From the menu toolbar, click Device Management > Holiday.
2. Select a holiday period from the list and click its Edit button to modify the settings.
The Edit window appears.
3. Enter the name of the holiday period and click Enable.
4. Select whether the holiday period will be categorized by date, week, or month and
then enter the start and end dates.
5. Click Apply to save the settings and then OK to return to the Edit window.
6. Repeat steps 2 to 5 for other holiday periods.
7. Click Exit to return to live view.
RS-232 settings
Use the Device Management menu to configure the RS-232 parameters such as baud
rate, data bit, stop bit, parity, flow control, and interface.
Figure 28: RS-232 setup window
Table 16: Description of the RS-232 settings window
Option Description
1.
Baud Rate
This is a measure of the speed of data transmission. Default is 115200.
2.
Data Bit
A bit is the smallest unit of data in a serial communication message. A data
bit is the bit carrying the information, as opposed to the start bit and the stop
bit. Default is 8.
3.
Stop Bit
Stop bits mark the end of a transmission of a serial communication message.
Default is 1.
4.
Parity
The method used to detect errors in the number of bits being transmitted.
Default is None.