Interlogix TruVision DVR 15HD - Using the IR Remote Control

Chapter 4: Operating instructions
20 TruVision DVR 15HD User Manual
Item
Description
Scroll Down Live view: Move to the next window.
Menu: Move the selection to the next item.
Using the IR remote control
The recorder is supplied with an infrared (IR) remote control unit. Like the mouse, it can
be used to operate all of the main functions of the unit.
The IR remote control can be programmed with a unique device ID address so that the
controller will only be able to communicate with recorders with that address. No
programming is necessary if using a single recorder.
The device ID address only applies when using a remote control and not when using a
keypad.
You can purchase a replacement remote control by ordering part number TVR-
REMOTE-1.
Figure 4: IR remote control
Item
Description
1
. Alarm
Acknowledge an alarm.
2
. Device
Enable/disable the IR remote control to
control the recorder.
3
. Numeric buttons
Select a camera, and enter a number in a menu option.
4
. Display
Switch between the different multiview formats.