Chapter 18: Using the web browser
136 TruVision DVR 15HD User Manual
Access the web browser
To access the recorder, open the Microsoft Internet Explorer web browser and enter the
IP address assigned to the recorder, as a web address. On the logon window, enter the
default user ID and password.
Note: Only one recorder can be viewed per browser.
User ID: admin
Password: 1234
The default values for recorder network settings are:
• IP address - 192.168.1.82
• Subnet mask - 255.255.255.0
• Gateway address - 192.168.1.1
• Server port: 8000
• Ports:
When using the browser:
RTSP port: 554
For more information on port forwarding, see Appendix C “Port forwarding information”
on page 151.
HTTPS settings
Using HTTPS (Hypertext Transfer Protocol Secure) is a secure protocol that provides
authenticated and encrypted communication. It ensures that there is a secure private
channel between the recorder and cameras
You can create self-signed server certificates as well as request certified server
certificates to ensure your network security.
To create a certificate:
1. Go to Configuration > Network Settings > HTTPS of the browser.
2. Click “Create Self-Signed certificate”.
3. Type in the country, hostname/IP address, and days of validity (there are more
parameters, but you don’t need to add anything to them).
4. Click OK.
5. Check “Enable HTTPS”.
This only works if you enter the address in the browser as HTTPS (as in
https://192.168.1.70).
To Next Page
Loading...
