Chapter 18: Using the web browser
TruVision DVR 15HD User Manual 143
Go to Browser Configuration to set up the browser parameters. See “Access the web
browser” on page 136 for further information.
Note: The configuration settings defined remotely are different from those that can be
defined locally.
Figure 34: Remote browser configuration window (Recording Schedule window shown)
Table 19: Description of remote configuration menus
Menu Function Description
Camera Setup Analog Camera
Overview
Define the analog cameras. See “Configure the signal input
channel” on page 63 for further information.
IP Camera Status Define the IP cameras. See “IP camera status” on page 64
for further information
IPC Import/Export Import and export the IP camera configuration information.
See “Import/export IP camera files” on page 67 for further
information.
Camera Recording
Settings
Define the general camera settings such as camera name,
stream record mode, resolution, frame rate, audio recording,
and pre and post event times. See “Camera recording
settings” on page 67 for more information.
Snapshots Define the image quality of snapshots. See “Snapshots” on
page 69 for further information.
Camera OSD Define which information is displayed on-screen. Only
applied for analog cameras. See “Camera OSD” on page 70
for further information.
Motion Detection Define motion detection parameters. See “Motion detection”
on page 72 for more information.
Privacy Mask Define the on-screen privacy mask areas. See “Privacy
mask” on page 73 for more information.
Camera Tamper Define the video tampering detection settings. See “Camera
tamper” on page 74 for more information.
Text Overlay Define the text to be added on-screen to display extra
To Next Page
Loading...
