embedded in the video and cannot be removed.
This can only be defined via the browser.
PTZ Setup Define the PTZ parameters of analog PTZ dome cameras.
See “Configure PTZ settings” on page 76 for further
information.
BNC/V-stream Define the V-stream parameters. See “V-stream encoding”
on page 80 for more information.
VCA Define an area on screen to enable a VCA alarm from IP
cameras. For analog cameras, the VCA setup is done from
the recorder.
See “VCA setup” on page 75 for further information.
Network Settings Network Settings Define the general network settings. See “Network settings”
on page 83 for more information.
PPPoE Define the PPPoE settings. See “PPPoE settings” on page
85 for more information.
DDNS Define the DDNS settings. See “DDNS settings” on page 86
for more information.
NTP Define the NTP server settings. See ““NTP server settings”
on page 87 for more information.
Email Define the settings to send an email. See “Email settings”
on page 88 for more information.
SNMP Define the SNMP settings. See “SNMP settings” on page 89
for more information.
Network Storage Define the type and location of the network storage system.
See “Add a HDD” on page 119 for further information.
UPnP Enable this function so that the recorder can automatically
configure its own port forwarding. See “UPnP settings” on
page 89 for more information.
HTTPS Define self-signed server certificates as well as request
certified server certificates to ensure your network security.
See “HTTPS settings” on page 136 for further information.
Network Statistics Check the bandwidth being used by remote live view and
playback. See “Network statistics” on page 92 for more
information.
Recording Recording Schedule Define the recording schedules. See “Recording schedule”
on page 93 for more information.
Manual Recording Define which cameras can manually record. See “Manual
recording” on page 96 for more information.
Alarm & Event
Setup
Alarm Input Define the alarm input parameters for when an external
alarm is triggered. See “Set up alarm inputs” on page 97 for
more information.
Alarm Output Define the response when an external alarm is triggered.
See “Manual trigger” on page 100 for more information.
Manual Trigger Define the manually trigger outputs of the recorder. See
“Manual trigger” on page 100 for further information.
To Next Page
Loading...
