Chapter 2: Physical installation
4 TruVision NVR 22 (S/P) User Manual
Items shipped with the product include:
• IR (infrared) remote control
• Two AAA batteries for the remote control
• AC power cords
• USB mouse
• Brackets
• Recorder
• Hard Drive Kits
• CD with software and manuals
• TruVision NVR 22 Quick Start Guide
• TruVision NVR 22 (SP) User Manual (on CD)
• TruVision Recorder Operator Guide (on CD)
Back panel
The figures below show the back panel connections and describe each connector on a
typical TVN 22 digital video recorder. Details may vary for specific models.
Before powering up the recorder, insert the hard drives and connect a main monitor for
basic operation. Once all required connections are done, enter the relevant data in the
setup wizard (see page 8).
Note: For every hardwired alarm input, connect one wire to the input connection with
the alarm number label and one wire to a ground connection (labeled G).
Figure 1: TVN 22 back panel connections
To Next Page
Loading...
