Chapter 18: Using the web browser
TruVision NVR 22 (S/P) User Manual 143
Local configuration
Local configuration includes all settings related to the web browser application such as
where to store snapshots and video exports.
Remote configuration
Remote configuration includes settings related to the recorder itself. Many of the
settings covered in remote configuration are also available in the local on screen
display.
Figure 37: Remote browser configuration window (System Information window shown)
Table 19: Description of remote configuration menus
Menu Function Description
Camera Setup Camera Recording
Settings
Define the general camera settings such as camera name,
stream record mode, resolution, frame rate, audio recording,
and pre and post event times.
Snapshots Define the image quality of snapshots. See “Snapshots” on
page 61 for further information.
Camera OSD Define which information is displayed on-screen. See
“Camera OSD” on page 62 for further information.
Motion Detection Define motion detection parameters. See “Motion detection”
on page 64 for more information.
Privacy Mask Define the on-screen privacy mask areas. See “Privacy
mask” on page 65 for more information.
Camera Tamper Define the video tampering detection settings. See “Camera
tamper” on page 66 for more information.
VCA You can define an area on screen to enable a VCA alarm.
PTZ Preset/Tours Define and select PTZ Presets and Tours.SD
To Next Page
Loading...
