56 TruVision NVR 22 (S/P) User Manual
Chapter 10
Camera setup
Use the Camera Setup menu to configure IP cameras. You can also configure the
camera status, OSD, snapshots, recording settings, image settings, PoE setup, motion
detection, privacy masking, camera tampering, restrict access, PTZ configurations and
VCA settings.
Note: Not all settings are available for IP cameras. For advanced IP camera settings,
please consult the IP camera web browser interface.
Supported IP cameras
The NVR supports TruVision and UltraView IP cameras as well as TVE encoders. It
supports a wide range of third party IP cameras through compliancy with the Onvif and
PSIA standards for open camera communication.
Please see the camera compatibility list for more detailed information.
IP camera status
The IP camera status menu allows you to add, edit and remove cameras to the
recorder, as well as update the cameras’ firmware or change its admin passwords.
To Next Page
Loading...
