TruVision NVR 22 (S/P) User Manual
105
Chapter 14
Device management
This chapter describes how to:
Set up the time and date of the recorder
Select the recorder language and set up general system parameters such as the
device name, menu timeout period, and enable/disable password requirement
Import/export configuration files
Upgrade the firmware
Set up holiday periods
Configure RS-232 settings
Time and date settings
You can set up the date and time that will appear on-screen as well as on time stamped
recordings. The start and end time of daylight saving time (DST) in the year can also be
set. DST is deactivated by default. See Figure 27 on page 106 for the Time settings
screen.
To Next Page
Loading...
