Chapter 5: Live View
22 TruVision NVR 22 (S/P) User Manual
The system status is displayed on the front panel by the status LEDs.
Video output
The recorder automatically checks the monitor outputs used on startup.
If an HDMI monitor is used, it will be the main output. If HDMI and VGA monitors are
both connected to the recorder, both will be main monitors; they will both show the
same view.
The TVN 22P has two HDMI and two VGA ports. If the HDMI 4K resolution setting is
used, the second HDMI port is disabled.
Live view mouse menu
Many features of live view can be quickly accessed by placing the cursor on a live
image and clicking the right-button of the mouse. The mouse menu appears (see
Figure 8 below).
Figure 8: The mouse menu for the monitor A
The list of commands available depends on which monitor is active; main or auxiliary
(monitor B). See Table 7 below. The default settings of these commands are provided
in the appendix under “Default menu settings” on page 153.
Table 7: Mouse menu for monitor A (main monitor)
Single Camera Switch to a full-screen view for the selected camera from the drop-
down list. See “Single and multiview display mode” on page 23 for
more information.
To Next Page
Loading...
