Chapter 13: Alarm and event setup
TruVision NVR 22 (S/P) User Manual 99
3. Click Apply to save the settings.
4. Click Exit to return to live view.
OH alarm reporting
The recorder includes the Osborne Hoffman (OH) alarm receiver software module. This
permits SIA and XSIA events to be reported to the recorder from Interlogix intrusion
panels via IP and to be linked to recorder actions.
The following Interlogix panels are supported:
ATS Master (EMEA only)
Advisor Advanced
NetworX panels
Up to three intrusion panels can be set up in the recorder. Each panel can report up to
32 intrusion zones (a zone is an intrusion panel input).
The panels must support the SIA or XSIA reporting protocol. They can report the
following alarm types to the recorder:
An arming event
A disarming event
An alarm event that has an “A” as a second character in the SIA/XSIA code
A heartbeat alarm
In the intrusion panel, set up the recorder as a normal monitoring station. Use OH
version 3.
To set up an alarm panel in the recorder:
1. From the menu toolbar, click Alarm & Event Setup > Intrusion Panel Setup.
2. In the Intrusion Panel Setup window, enter the required settings.
To Next Page
Loading...
