Chapter 14: Device management
TruVision NVR 22 (S/P) User Manual 111
• QNAP TS-219 II Turbo NAS
To set up a network storage system:
1. Click the Configuration tab in the browser toolbar and then select Network
Settings > Network Storage.
2. Under Server IP, enter the IP address of the desired remote storage system.
3. Under File Path, enter the file path name to define where on the remote storage
system you want to store the files.
Note: If using the NAS storage systems Seagate BlackArmor NAS 220 or Iomega
StorCenter ix2-dl, you must add the prefix “/nfs” to the NAS path.
4. Under Type, select type of storage system to be used: NAS or SAN. Default is NAS.
5. Up to eight remote storage systems can be set up.
6. Click Save.
To Next Page
Loading...
