Chapter 15: Storage management
TruVision NVR 22 (S/P) User Manual 119
6. Type in a name for the array, select the RAID Level, Initialization Type, and the
drives to be included.
7. Click OK and then Initialize to start the process. When the process is complete,
data on the RAID group is displayed.
Note: You can create a RAID array of RAID 0, RAID 1, RAID 5, and RAID 10.
• If you choose RAID 0, at least 2 HDDs must be installed.
• If you choose RAID 1, 2 HDDs need to be configured for RAID 1.
• If you choose RAID 5, at least 3 HDDs must be installed.
• If you choose RAID 10, 4/6/8 HDDs need to be configured for RAID 10.
To verify the RAID:
1. Click Storage Management > HDD Information.
To Next Page
Loading...
