Chapter 17: System information
TruVision NVR 22 (S/P) User Manual 127
3. To view camera information, click Camera.
You can view the information on each camera: Camera number, camera name,
status, motion detection, tamper proof, video loss, preview link sum, and preview
link information.
Preview link sum shows the amount of rote applications that are streaming video
from this video channel. Preview link information shows you the IP addresses that
are currently connected to this channel.
4. To view record information, click Record.
You can view the camera number, recording status, stream type, active frame rate,
active bit rate versus reserved bit rate (Kbps), active resolution, active record type,
and active encoding parameters.
The “Preview Link Sum” shows the number of streams being viewed by the
recorder. The “Preview Link Information” lists all the IP addresses of the streams
viewed by the recorder.
5. To view alarm input information, click Alarm Inputs.
You can view the alarm input number, alarm name, alarm type, alarm status, and
triggered camera.
To Next Page
Loading...
