Interlogix TruVision NVR 22 - Page 161

Appendix D: Default menu settings
TruVision NVR 22 (S/P) User Manual 155
Brightness: 128
Contrast: 128
Hue: 128
Enable Rotate: Off
Mirror Mode: Off
Motion Detection
Motion Detection Settings
Camera: IP Camera 01
Enable Motion Detection: No
Enable Dynamic Analysis: Yes
Actions: Trigger Channel [camera-self]; Arming
Schedule - All day for whole week; Actions: (Null)
Sensitivity: 4
Zone: Full Screen
Privacy Mask
Privacy Mask Settings
Camera: IP Camera 01
Enable Privacy Mask: No
Clear All
Clear Zone 1, 2, 3, 4: Null
Camera Tamper
Camera Tamper Settings
Camera: IP Camera 01
Enable Camera Tamper: No
Actions: Arming Schedule - All day for whole week;
Actions: (Null)
Sensitivity: 0
Clear
VCA
VCA
Camera: IP Camera 01
Enable VCA Alarm: No
VCA Type: Face Detected
Actions: Trigger Channel [camera-self]; Arming
Schedule - All day for whole week; Actions: (Null)
PTZ Preset/Tours
Preset/Tours
Camera: IP Camera 01
Save Preset