TruVision Series 3 IP Camera FW3.1 Configuration Manual 19
• DynDNS: Enter the DNSS server address, members.ddns.org, which is
used to notify DDNS about changes to your IP address, the host name for
your camera, the port number (443 (HTTPS)), and your user name and
password used to log into your DDNS account. The domain name
displayed under “Host Name” is that which you created on the DynDNS
web site.
• ezDDNS: Enter the desired host name under “Host Name”. The default
host name is utc-serial number. The new host name is registered when
you click Save.
Note: The default server address is www.tvr-ddns.net, which cannot be
changed.
4. Click Save to save changes.
5. If you selected ezDDNS and changed the host name, click the Get URL
button to confirm the domain name, which is displayed under Effect Domain.
To define the PPPoE parameters:
1. Click Configuration > Network > PPPoE.
2. Check Enable PPPoE to enable this feature.
3. Enter User Name, Password, and Confirm password for PPPoE access.
4. Click Save to save changes.
To Next Page
Loading...
