24 Installation Guide
6. Make sure the MAC ID that is automatically populated in
the MAC address field matches the MAC address printed
on the back of the camera. If not, change in the MAC
address to the one listed on the back of the camera.
7. Click Save.
Note: The camera may take up to 1 or 2 minutes to finalize
association with the intrusion panel and show in cameras
tab.
8. You have now added the camera to UltraConnect.
View live stream and the latest video clips
1. Click Cameras tab on bottom of the screen.
2. All available cameras are shown.
To Next Page
Loading...
