Interlogix TVW-1120 - Resetting Camera to Factory Defaults; Camera Technical Specifications

Installation Guide 29
5. Delete the text in Camera Name, IP Address, and MAC
Address.
6. Click Save.
Reset the camera to factory default
If needed, the camera can be reset to factory default. Remove
the camera cover, then press and hold the RST/WPS button for
20 seconds.
Specifications
Electrical
Voltage input
12 VDC, PoE (IEEE 802.3af)
Power consumption
Max. 5 W
Wi
-Fi parameters
Wi
-Fi standard IEEE802.11b/g/n
Frequency range
2.4 to 2.4835 GHz
Communication
bandwidth
Support 20/40 MHz